Add a Local Storage

If you wish to use the local hard disk directory of a host to create storage resources, you can refer to this section for instructions.

• Make sure to plan the mount path for the local storage on the host's disk in advance.
• Check the quantity and type limitations between the cluster and the data storage to the attached. For more information, see Cluster and Data Storage.

1. In the navigation pane, choose Inventory > Data Storage.

2. Select the target data center and click Actions > Add Data Storage.

3. In the Add Data Storage dialog, set the following parameters:

   Basic Information

   • Name: Name of the local storage.

   • Description: Optional. You can add relevant information as a note.

   • Type: Select Local Storage.

   • Data Center: Location of the data center where the local storage resides. Configurations

   • Cluster: The cluster where the local storage needs to be attached.

   • Addition Method: Supports Free Disk and Local Directory methods

     If you choose Free Disk, you need to configure the following parameter:

     • Host Disk: Add unmounted or unpartitioned free disks on the host

       Configuring a free disk will format the selected disk, completely clearing all partitions, file systems, and data on the disk.

   • Mount Path: The mount path for the local storage on the host's disks

     System directories such as /, /dev/, /proc/, /sys/, /usr/bin, and /bin cannot be used. Using system directories might cause the hosts unable to work properly.

4. Review the configuration and click OK.